Skip to content

    Jupiter Inlet Beach · Palm Beach County, Jupiter to Boca Raton

    Roofing in Jupiter Inlet Colony

    Jupiter Inlet Colony sits at the very mouth of the Jupiter Inlet, a small oceanfront town at the north end of Palm Beach County where the Atlantic, the Inlet and the Intracoastal meet. No roof in the county takes more salt or more wind.

    Request your free inspection!

    📞 We'll call you back to schedule your free roof inspection

    Google★★★★★4.8 · 200+ reviews

    • Molsbee Roofing 50-year milestone crest50 Years
    • GAF Master EliteGAF Master Elite®
    • Owens CorningOwens Corning
    • Better Business BureauBBB
    • Molsbee Roofing Lifetime Workmanship Warranty crestLifetime Workmanship Warranty

    Jupiter Inlet Beach · Palm Beach County

    Roofing in Jupiter Inlet Beach since 1975.

    Jupiter Inlet Colony is surrounded by water on three sides, with the Inlet's outflow and the ocean's onshore wind delivering salt spray directly onto every roof in town. The consequence is simple: whatever the roof surface, the metal beneath and around it fails first.

    Valley flashing, drip edge, hip and ridge fasteners under tile; clips, screws and cut edges under metal panels; chimney and wall flashings everywhere. A roof here can look immaculate from the street while its fasteners have rusted to lace.

    Every job we do in the Colony specifies stainless or copper fasteners and flashing and sealed edge metal as the standard rather than an upgrade, and every inspection starts by probing that metal rather than admiring the surface.

    • Jupiter to Boca Ratonservice area
    • Freeroof inspection with photos
    • CCC1327429Florida licensed
    Tile roof by Molsbee Roofing

    Good to know

    About roofs in Jupiter Inlet Beach.

    • Roof repair at the Inlet

      Repair is most of what we do, and a Colony repair is a metal repair almost every time. Rusted valley flashing is cut out and relined in stainless or copper; drip edge is renewed along the whole eave; corroded hip and ridge fasteners are pulled and the caps re-bedded and screwed with stainless; the surrounding tile is lifted, saved and relaid so the fix disappears. On standing-seam roofs, rusted screws are replaced with stainless, open cut edges hemmed and sealed, boots and ridge caps renewed. The stain inside is rarely under the entry point, so the roofer traces the water from the roof and the attic, photographs the source, and prices the repair in writing before starting. After a storm off the Atlantic, a secured tarp comes first and the permanent repair follows once the deck is dry.

    • Tile or standing seam for a Colony home

      When a Jupiter Inlet Colony roof is past repair, the honest choice is between tile and standing-seam metal, both built for the exposure. A tile re-roof strips to the deck, replaces soft plywood and salt-eaten fascia, lays new self-adhered underlayment with valleys lined in stainless or copper, and sets concrete or clay tile to the county's wind-code attachment with stainless fasteners and caps. A metal re-roof uses aluminum panels on stainless concealed clips, hemmed and sealed edges, and matching metal at every flashing, because coated steel does not belong at the mouth of an inlet. The Town of Jupiter Inlet Colony reviews and permits the work and inspects at dry-in and final. We write tile and metal side by side for your house so the choice is a comparison, not a guess.

    • What a roof costs here, and why

      Tile and standing-seam metal both sit at the top rung of what a full roof costs in Palm Beach County, and a Colony roof with stainless or copper throughout sits at the top of that rung by necessity. Area and pitch, the material, what comes off and what the plywood and fascia look like once the roof is bare, and how many valleys, chimneys and wall flashings need metal set the rest. Full replacements we have priced across the county since spring have landed in the county's typical range; we quote your roof from a measurement rather than an average. After the free inspection you receive an itemized scope from tear-off through cleanup, with a deck allowance based on what the roofer found. Financing options are explained at the inspection if you ask.

    • A family roofer that knows the north end of the county

      Molsbee Roofing is a family business since 1975, licensed CCC1327429, based in Lake Worth Beach and working Palm Beach County, Jupiter to Boca Raton; the Colony is the northern end of that stretch and we have been driving up US-1 to it for decades. We know what the Inlet does to a fastener, what the Town expects on a permit, and we are still here next season when the roof needs looking at again. Every job is permitted and inspected. Every price is itemized and in writing before work starts. Free roof inspections. Call 561-318-8624, open 24 hours a day, 7 days a week.

    Tile roof by Molsbee Roofing

    How it works.

    Roof work by Molsbee Roofing
    1. 1

      Free roof inspection

      We photograph what we find and hand you a written, line-item estimate.

    2. 2

      Written price

      You see the price before anyone starts. No surprises on the invoice.

    3. 3

      Permit and install

      We pull the permit, do the work and clean up every day.

    4. 4

      Inspection and warranty

      County inspection passed, warranties registered, final walk with you.

    Why Molsbee

    Why Molsbee Roofing.

    • Lifetime Workmanship Warranty

      We stand behind the install for as long as you own the home.

    • Florida licensed CCC1327429

      Fully insured, every job permitted and inspected.

    • 4.8 stars, 200+ Google reviews

      Reputation built one Palm Beach County roof at a time.

    • Family-owned since 1975

      Three generations of Palm Beach County roofing.

    Roof inspection
    Tile roof by Molsbee Roofing
    Tile roof by Molsbee Roofing

    Get a free roof inspection.

    Written price before any work starts.

    Instant Roof Quote